The Wavlink AC1200 dual band WiFi extension is suitable for use both at work and at home. Today, we’ll go over how to setup, install, and use this extension. The process for setting up a Wavlink ac1200 wifi extender is the same as for other Wavlink extenders. The extender and an Ethernet cable are the first things you’ll find inside the box. Keep in mind that the WPS settings require a place with minimal WiFi signal interference. There are two ways to set up a Wavlink ac1200. one who moves around. Install the modem next. We’ll go over both of them.In this article you know about the wavlink ac1200 wifi extender setup.
Wavlink AC1200 extender setup with Router
The AC1200 router setup is very simple and consists of the following steps:
- After being plugged into an outlet, the extender only needs a 45-second startup period.
- When the LED indicator on the extender begins to flash red, hit and hold the WPS button on your home network for about five seconds.
- Keep in mind that the period for how long you must hold it may vary based on the router you are using.
- After about five seconds, the WiFi signal LED on this router starts to flash and change colours.
- It suggests that it is attempting to connect with the new device.
- Now, for about six seconds, press down the WPS button on the extender until a blue light begins to blink.
- It may flash red before turning blue.
- It shows that the extender and network are communicating.
- Remember that the connecting process usually takes 60 seconds.
- When the flickering red light transforms to a solid blue, the Wavlink ac1200 Setup is complete.
Note:- If you need any help regarding your wavlink wifi extender so contact our technician or visit the official website that is ap.setup.
Wavlink ac1200 Setup with smartphone
Here’s how to use your mobile device to set up your extension. Connect the extender to an outlet as before and wait a few minutes for it to function. Do the steps right now:
- A red LED light will commence to flicker.
- Navigate to your smartphone’s WiFi Settings and look for available networks there.
- Request information on Wavlink N or Wavlink HC.
- Participate in any of them.
- Then, open the web browser on your phone and type 192.168.10.1 into the location bar.
- Next, enter the admin preset password.
- Following that, you must select an area, a timezone, and establish a new password.
- Remember that you must use this new passcode the next time you log into the system.
- As a result, keep that in mind.
- After that, on your screen, select the Relay option.
- Locate your host’s WiFi connection.
- The router’s network passcode should then be entered.
- Wait for the progress metre to show after clicking Connect.
- Allow 30 to 60 seconds for the process to complete.
- As the LED light returns to solid blue, you will have a clean and clear WiFi connection.
- After you’ve made a connection, you can install the WiFi extender in the area where you want a stronger WiFi signal.